RF Central microLite Transmitter, Руководство пользователя

Страница: 30 / 38

microLite Transmitter User Manual
Revision 1.2
30
4 Operation
While this chapter contains basic information about the operation of the microLite transmitter, the
programming of the unit (including preset configuration) via the NanoController GUI is not
covered. Please refer to the IMT NanoController manual (IMT Publication: M27-0001-00A) for
detailed information on how to program and configure the unit.
In this chapter, you will find info on how to use the
microLite transmitter to transmit video, audio,
and user data.
4.1
microLite
Set-up
•
Remove
microLite Transmitter (MLT)
from the case. Mounting bracket and Litepanels kit
is preassembled. Attach assembly to camera.
•
Connect video source to the Video/SDI Input (BNC jack) using a 75
Ω
BNC cable.
•
Connect analog audio source (Telocate to XLR) to the transmitter using the two provided
audio cables (if not using embedded audio).
•
Connect TX antenna (small omni directional) to the RF output (SMA).
•
Connect the power source to the
MLT
using the supplied transmitter power cable.
•
Select the desired preset using the set button.
•
Transmit signal using the MLT Tx/Standby button.
•
Hi/Low button will control the power output level.
•
microLite Transmitter will have one of the following button controls:
o
BARS – Will turn internal Bars on and off.
o
FAN – Will turn the internal fan on and off
Note: The unit has an internal fan and the air ducts must not be blocked .
Figure 4-1: Detail of Air Ducts