RF Central microLite Transmitter, Руководство пользователя, Страница: 31 / 38

microLite Transmitter User Manual
Revision 1.2
31
4.2 Powering Up the microLite
Turn on the power to the overall system.
The microLite requires up to 25 seconds to complete its internal power up sequence. The top
row of front panel preset led’s (1, 2, 3, 4) light up in succession as the unit advances thru the
boot process.
Supply current will jump up in steps as internal circuits are powered. The final DC supply
current will settle after 20 seconds.
Note: Before applying power, ensure proper antenna termination on RF output.
4.3
microLite
Pre-Configured Options
The microLite has a wide range of programmable settings. It is shipped with factory default
settings that are applicable to many use cases.
Before using the
microLite in your application, you should pre-configure it to for the settings
you want to use in your application. Settings are selected and configured using the
NanoController software. Please refer to the NanoController documentation for details.
4.4 Button and LED Interface
The microLite has several buttons and LED’s on the front panel, which are used to perform
basic operation and view basic unit status. Any changes made via a remote control interface
will be reflected by the front panel LED’s.
Figure 4-2: Unit Interface - Broadcast