1.
Locate the door marked (Single) on the back door frame. Lay this door on a level
surface with the trim facing up. Depending on which way you want the door to swing,
install (3) three 5" hinges on the left or right side of the door. To position the hinge
properly, hold the rectangular plate against the frame. Use 1-3/4" black screws.
Step 14 Install Doors & Hardware
5.
Temporarily prop the doors in the
opening. Leave a space at the top of the
doors and between the doors and the
side trim to allow room for the doors to
expand when they absorb moisture. Use
OSB shim to support bottom of doors.
If your door opening is out of square,
the space around the doors will not be
even. You can remove and reposition
the side trim to make allowances for
this. The side trim does not have to be
flush with the frame of the door opening.
You can move the trim in or out to make
the door spacing equal.
6.
Install hinges to trim with 2" black
screws.
OSB Shim
2.
Lay the left door with the trim facing up. The
siding on the left door extends past the door trim.
See detail below.
3.
Install 5" hinges to the left side of the door frame.
4.
Install hinges to the right side of the other door.
7.
Install a barrel bolt on the bottom of inside
of left door to secure this door in place
when closed. You will need to drill a hole
in the floor for the round shaft to drop into.
8.
Install another barrel bolt at the top of the
door.
Barrel Bolt on the
back of left door
Install Door Latch
Left Door
Siding Extends Past Trim
