Reynolds Building Systems the Easton Скачать руководство пользователя страница 13

Страница: 13 / 20

Select siding panels that are 75-3/4" in length for this wall panel.

Check measurements. They

should be the same or the

door opening will not be square!

Step 9

Assemble Double Door Wall

2x3 Door Header

Siding 3/4"

Below Header

Cut Edge

Tongue Edge

Cut Edge

Butt Square Edges

Together

Locate a 16" siding panel that has a 'LAP' edge. Position the 'cut' edge flush with the left side

of the door opening. Do not nail the 'LAP' edge until the other siding is applied.

Select the 24" wide siding panel, with the 'tongue edge', and install this siding panel at the

left end of the wall frame as shown below. The siding will extend 3-1/2" beyond the frame.

Install (2) two 4-3/4" pre-cut siding panels over the door opening, flush with the top plate.

Install a 16-3/4" siding panel with the 'cut' edge flush with the side of the door opening.

Install the last siding panel. It will extend 3-1/2" beyond the 2x4 wall frame.

LAP Edge

16" Siding Panel

16-3/4"

Siding Panel

Siding Extends 3-1/2"

Past 2x4 Frame

Wall Studs with Door

Jacks Attached

68-1/2" Top Plate

2x4 Bottom Plate w/ Door Spacer

68-1/2" Wall Plates

72' Wall Studs

72' Wall Studs with door

jacks attached

Bottom Plate from Step 8

Material List

Gather the material listed below to assemble the door wall.

Install (4) four 72" wall studs over the 'X' marks. Use (2) two 10d sinkers at each end of stud.

Install wall studs, with the

door jacks attached, on each
side of the door spacer.

Install door header on the

door jacks.

68-1/2" Bottom Plates

Содержание the Easton





















Результаты поиска

Содержание the Easton

Отзывы:

Похожие инструкции для the Easton

Бренды по названию

Популярные бренды

Reynolds Building Systems the Easton, Инструкция по сборке

Результаты поиска

Содержание the Easton

Отзывы:

Похожие инструкции для the Easton

Бренды по названию

Популярные бренды