2.
Install the last siding panel on the back wall. Nail
along the siding where the panels overlap.
Step 10 Set Wall Panels
5.
Finish nailing along siding edges that overlap adjoining wall panels.
6.
Remove the door spacer from the door opening.
7.
Cut out bottom 2x4s from the door openings.Save for tie plate material.
1.
Set the back wall panel between the end walls. Secure wall panels together at the corners. Use
(4) four 10d coated nails per corner. Nail wall panels to the floor. Nail through the bottom plate.
Space 10d sinkers 24" apart.
3.
Disassemble the longer shipping pallet and use the 82" long 2x4s to brace
the walls to hold them straight.
4.
Set the front wall panels between the end walls.
Nail Along
Siding Edge
Cut Bottom 2x4 From Opening
Cut 2x4
From Opening
Remove 2x4 Door Spacer
2x4 Wall
Brace
2x4 Brace on each side
of the door opening
