Reya BATVIEW 2, Руководство по эксплуатации и инструкция пользователя

Страница: 9 / 12

USE SETTINGS MODE
Batview2-rev 01 Batview2-rev 01
UK
Settings mode
Factory settings (default settings):
4
Temperature expressed in degrees Celcius.
4
A single set of batteries.
4
Capacity of house batteries: 340Ah.
4
Type of shunt: 300A.
4
Low battery voltage alarm: 11.0V.
4
Type of house batteries: With free electrolyte
(FREE)
Factory settings are operational until the user en-
ters his/her own settings.
To save any changes, quit by pressing and holding
the SET button. The configuration settings are sa-
ved in a non-volatile memory, as a replacement
for the factory settings.
These settings will, therefore, be automatically
applied when the device is next powered on.
It should be noted that the device automatically
leaves settings mode 45 seconds after the last
time the SET button is pressed without saving the
modified settings in a memory.