REXROTH EFC3600 Series, Инструкция по эксплуатации

Страница: 21 / 90

1 Important Notes
1.1 Safety Instructions
1.1.1 General Information
●
Do not attempt to install and operate the components of the electric drive
and control system without first reading all documentation provided with the
product. Read and understand these safety instructions and all user docu-
mentation prior to working with these components. If you do not have the
user documentation for the components, contact your responsible Rexroth
sales partner and ask for these documents to be sent immediately to the per-
son or persons responsible for the safe operation of the components.
●
If the supplied documents contain some information you do not understand,
it is absolutely necessary that you ask Rexroth for explanation before you
start working at or with the components.
●
If the component is resold, rented and/or passed on to others in any other
form, these safety instructions must be delivered with the component in the
official language of the user's country.
●
Only qualified persons may work with components of the electric drive and
control system or within its proximity.
In terms of this Instruction Manual, qualified persons are those persons who
are familiar with the installation, mounting, commissioning and operation of
the components of the electric drive and control system, as well as with the
hazards this implies, and who possess the qualifications their work requires.
To comply with these qualifications, it is necessary, among other things,
– to be trained, instructed or authorized to switch electric circuits and com-
ponents safely on and off, to ground them and to mark them,
– to be trained or instructed to maintain and use adequate safety equipment,
– to attend a course of instruction in first aid.
●
The technical data, connection and installation conditions of the components
are specified in the respective application documentation and must be fol-
lowed at all times.
●
If the components take the form of hardware, then they must remain in their
original state, in other words, no structural changes are permitted. It is not
permitted to decompile software components or alter source codes.
●
Do not mount damaged or faulty components or use them in operation.
●
Only use accessories and spare parts approved by Rexroth.
●
Follow the safety regulations and requirements of the country in which the
electric components of the electric drive and control system are operated.
●
Proper and correct transport, storage, mounting and installation, as well as
care in operation and maintenance, are prerequisites for optimal and safe op-
eration of the component.
Bosch Rexroth AG
Important Notes
DOK-RCON01-REX*F*UL***-IN10-EN-P
1/69