17
CLEANING AND MAINTAINING THE HOT TUB
The glass fibre pool must be cleaned and dried whenever possible, such as when the pool is empty.
After use, the pool must be flushed thoroughly. If pool care products such as chemicals are used in
the pool, the water’s pH must be monitored closely to avoid damage.
Treating the surfaces of glass fibre pools
•
We recommend that REXENER hot tub pools be cleaned thoroughly once per year. Detergents
suitable for plastic surfaces can be used for cleaning. Edges and surfaces should be cleaned
with a damp cloth. When necessary, stuck dirt can be removed from pool surfaces with a magic
sponge, for example. Abrasive materials must not be used.
•
The water must meet swimming water criteria, the pH value must be correct, and the chemicals
must be dosed in accordance with instructions.
•
In normal use, there is little need for maintenance.
•
If the gelcoat surface requires polishing or grinding, devices/products intended for boat care are
suitable for treating the surfaces.
•
Contact the manufacturer’s maintenance service if necessary.
The gelcoat colour codes for the pools:
•
Gabro black (dark grey) Gelcoat RAL7021
•
Arctic white (white) Pool colour SW P10616 S
•
The warranty granted for the pool does not cover faults caused by erroneous use, such as
corrosion of the pool or its accessories, or surface damage. You can find the detailed warranty
terms at www.rexener.com
•
When emptying the pool, the water must be directed into the appropriate waste-water system.
When using chemicals, the water must be drained to the sewer to prevent contamination.
Treatment of wood frame surfaces
Oiled spruce panels retain their colour well, but it is recommended to repeat the surface treatment
according to need..
Hottubs are manufactured using Rexener Gray, a shade of gray tinted separately for Rexener products,
to which a wood preservative has been added. You can purchase the original color from your nearest
Rexener dealer or the Rexener online store. With the original Rexener paint, you ensure the best
possible durability of the wood frame in all conditions and the shade is the same as the original.
If you wish, you can also use another paint suitable for treating wood cladding surfaces. In general,
the most common wood oils and translucent dyes, both water-based and solvent-based, are suitable
for this. Always make sure the product is suitable for the surface to be treated first and test it on a
small area before treating the entire pool. The warranty does not cover defects caused by the use of
the wrong type of treatment agent.