12
IR Remote Control
ID Button on Remote Control
If a DVR System ID is set to 0, the infrared remote
control will control that DVR without any additional
operations. If the system ID is 1 to 16, you must to press
the
ID
button on the remote control and then press the
number button (1 to 16) in order to control that DVR.
If the System ID of two or more DVRs is set to 0, those
DVRs will react to the infrared remote control at the
same time.
BOOKMARK Button on Remote Control
When in the playback mode, pressing the
BOOKMARK
button adds the current playback point to the bookmark
list or moves to the registered bookmark point.
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit takes approximately 50 seconds to initialize.
Shutting down the System
Highlight
Shutdown
in the System menu and press the button. The Shutdown
screen displays asking you to
confirm whether or not you want to shut the system down. After selecting
Shutdown
in the screen and pressing
the button, a screen will appear telling you when it is safe to disconnect power.
