REVERSO-MANUFACTURING DV200 NG/RV, Инструкция по установке и эксплуатации

Страница: 18 / 29

18
3. Carefully avoid any clumping or large build-ups.
4. Do not pack down on top of the burner; leave them fluffy and loosely layered around the front
log.
5. Do not place embers on the rear burner.
6. Upon the first light up, watch for smooth and fast ignition to
all burner ports. If a long delay is
noted:
a) First, wait for the appliance to cool down
b) Open the front door of the appliance
c) Carefully reposition the embers at the point of the delay
d) Check to ensure that no burner ports are plugged solid
CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE DOOR OPEN CARE OF YOUR
DOOR ASSEMBLY.
It will be necessary to clean the glass periodically. During a cold start up condensation will
sometimes form on the glass; this is a normal condition with all gas fireplaces and stoves.
However, sometimes this condensation can allow dust and lint to cling to the glass surface. Also,
sometimes initial paint curing of the appliance can leave behind a slight film on the glass. This is a
temporary problem.
It is therefore recommended that the glass be cleaned initially after about the first two weeks of
use.
After that, depending upon the amount of use, cleaning should be required no more than two or
three times per season. To clean the door, use a mild cleaner (i.e.. Windex, Fantastic) and a soft
cloth. Abrasive cleaners will damage the protective coating.
MAIN BURNER
REAR LOG
FRONT LOG
FRONT BURNER
EMBER MATIERAL
FRONT SCREEN
TOP VIEW
EMBER PLACEMENT DIAGRAM