Electricial Installation
54
Operating instructions SVCD(S)
123456278
-
419A58
Elektrotechnische Anlagen GmbH
1
4.4
Connection
The wires will be connected to the terminals at the bottom terminal plate.
4.4.1
Power connection
Fusing (also refer to chapter 3.3.4)
•
The specifications of chapter 3.3.4 (fuses and wire cross sections) are recommenda-
tions and refer to the operation
– in cabinets and machines
– installation in cable ducts
– maximum ambient tempe40°C.
•
When choosing the cross section of the wire the voltage drop under load should be
considered (refer to chapter 3.4)
•
Protection of the wires at mains side (L1, L2, and L3):
– by commercial wire protection fuses
– fuses have to be compliant with the relevant standards on site
– rated voltage of the fuses have to be compliant with the voltage on site
•
Protection of the power feedback unit at mains side (L1, L2, and L3):
– By commercial semiconductor fuses.
– Fuses have to be compliant with the relevant standards on site.
– Rated voltage of the fuses has to be compliant with the voltage on site.
•
Protection of the power feedback unit at DC side (+UG, -UG):
– fuses are part of the power feedback unit (refer to chapter 3.3.4.2).
The erector/user of the plant bears the responsibility for the observance of fur-
ther relevant standards (e.g.: VDE 0113, VDE 0289 and so on).
