Settings and adjustments
GB17
In connection with preventive safety, for
the Kelvin, Snellius and where the backrest
is continuously adjustable, the rear wheels
are mounted in the rearmost position in the
factory.
Seat height
You can adjust the seat height to various
heights depending on whether your Canto
Nxt is a push or manual wheelchair. There
are 3 axle holes and 3 different telescopic
tubes available for adjusting the seat height.
For the manual wheelchair, the seat height is
related to the wheel size.
N.B.:
seat angles can differ with the
different Matrixx seats.
Push wheelchair
Required seat height
Tyre size
Position
42 cm* **
6” x 12,5”
A1 / T1-A
47 cm
6” x 12,5”
A1 / T2-B
8” x 12,5”
A1 / T1-B
52 cm
6” x 12,5”
A1 / T3-A
8” x 12,5”
A1 / T2-B
57 cm
8” x 12,5”
A1 / T3-A
* At a seat height of 42 cm, adjusting the wheelchair to a
neutral seat angle is realised by placing the gas springs
in the upper frame hole, see also page 12.
* * Not possible in combination with Axxion due to the
200x50 front wheels.
Push wheelchair
T1A
T1A
T1B
T1B
A1
A2
A3
