10
Delivery contents (Figure 1)
• 1x LED light
• 2x dowels
• 2x screw
• 2x mounting plate
Technical Data
General
• Operating voltage/mains frequency: 230V~; 50Hz
• Colour temperature: 4000K
• Ra/CRI: ≥ 80
• Energy Efficiency Index (EEI): A+
• LED lifetime: 30,000h
• Beam angle: 125°
• IP protection type: IP65
• Ambient temperature -20°C to +35°C
Installation
Installation may only be carried out by trained specialists in accordance with the applicable
installation requirements. For this purpose, consult a certified electrician.
ATTENTION!! Before installation, the power supply must be disconnected from the mains and
secured against being switched on again (Fig. 3).
1. Use the mounting plate to mark the holes where you want to mount the luminaire. Please note the
corresponding drilling distances of the individual luminaire types (Fig. 4). Check first that there
are no live cables at this point.
2. Insert the dowels into the drilled holes and fasten the mounting plates with the screws (Fig. 5).
3. Remove the covers (a) and (b) from the luminaire connection side by unscrewing them. Then
pass the connection cable through the covers (a) and (b) (Fig. 6).
LG06P-06-10
• Output: 10W LED
• LED illuminant: 56 SMD LED´s
• Luminous flux: 900 Lumen
• Dimensions: 720x53x35mm
LG06P-06-18
• Output: 18W LED
• LED illuminant: 96 SMD LED´s
• Luminous flux: 1600 Lumen
• Dimensions: 720x53x35mm
LG06P-12-18
• Output: 18W LED
• LED illuminant: 96 SMD LED´s
• Luminous flux: 1600 Lumen
• Dimensions: 1250x53x35mm
LG06P-12-36L
• Output: 36W LED
• LED illuminant: 264 SMD LED´s
• Luminous flux: 3500 Lumen
• Dimensions: 1250x53x35mm
LG06P-15-24
• Output: 24W LED
• LED illuminant: 128 SMD LED´s
• Luminous flux: 2160 Lumen
• Dimensions: 1530x53x35mm
LG06P-15-45L
• Output: 45W LED
• LED illuminant: 264 SMD LED´s
• Luminous flux: 4300 Lumen
• Dimensions: 1530x53x35mm
GB
ANL_LG06P-06-10_LG06P-06-18_LG06P-12-18_LG06P-12-36L_LG06P-15-24_LG06P-15-45L.indd 10
14.05.2019 15:39:31