Important advice
!
!
!
!
!
!
!
Before using the device, check carefully whether you have installed the correct type of bulb.
Before using the device, make sure that all screws have been fixed with a torque of 0,8Nm.
The bulb and the halogen floodlight projector will get extremely hot when using them. Avoid any contact
during the use of the device.
Do not use the halogen floodlight projector near inflammable objects as these can catch fire, because of
the extreme heat of the halogen floodlight projector. Keep the mentioned security distance.
After turning off the halogen floodlight projector, let it cool down for 20 minutes before touching the
projector.
Do not use the projector without a correctly installed safety glass (danger of injuries when the bulb
explodes).
Not suitable for heavy use.
Technical Data:
Halogen floodlight projector 150 Watt
Movement detector
Reference:
00716 / 00718
Type:
0102R
Mains connection:
230V~ / 150 Watt
Detection angel:
120°
Adjustment:
horizo/- 40° till 50° vertically
Detection range:
max. 20m adjustable
Brightness control:
3 - 1000 Lux
Switching duration:
5 seconds - 8 minutes
Splash-proof protection:
IP 44
Bulb:
R7s 150 Watt / 75mm
NYM-J 3x1,5 or NYY-J 3x1,5 or H07RN-F
3G1,0 - 3G1,5
H07RN-F 3G1,0 - 3G1,5 or H05RN-F
3G1,0 - 3G1,5
Fixed connection:
Flexible cable connection:
Protecting glass:
REV 006003 / Dimension 132 x91mm
Guarantee
1. During the manufacturing, this product is examined by several testing devices which comply with the
latest technology. In case of any damage we will grant a warranty to the following extent:
2. The duration of the warranty is 2 years starting from the date of purchase.
3. If it is clear that the damage occurs during the warranty period and is due to manufacturing
or material quality, the product will be repaired or you will get a new product at our
expenses.
4. The liability is excluded for transportation damages and for damages related to a faulty
installation of the product.
5. If we do not accept your warranty claim and six months later, we have not received your
opposition, the right to get your product repaired at no expenses is considered to be expired.
6. In case of a warranty issue, please send the defective product with your purchase receipt
and a short description of the damages to the point of purchase or to REV Ritter Germany.
7. Without proof of warranty, the product will be repaired at your expenses.
Security distance between projector
and illuminated object: 1m at a
minimum
1,0m
REV Ritter GmbH
D-63776 Mömbris
: (+49180) 500-7359
E-mail: [email protected] Internetadresse: www.rev.biz
•
• Phone
•
Replace every broken front glass,
by an original REV front glass
min 2,5m
max. 175°
