Operating the machine
33
Fig. 22: Loosening the clamping unit
•
Rest the counter wrench (
Ks
) on the latching bracket (
Q
) during closing and
loosening.
5.11 Power failure during grinding
If the power fails during grinding, grinding will be interrupted. All parameters are
retained, and the remaining grinding time is saved. When the device is switched
on again, a corresponding message appears in the display.
You can continue the process by pressing the START button. The automatic
saving of the remaining grinding time means the grinding then continues until the
end of the originally set grinding time.
For safety reasons the device must be opened and the grinding chamber
inspected. Grinding then continues automatically when the lid is closed.
The process is aborted by pressing the STOP button.
5.12 Mahlbehälterauswahl für unterschiedlichen Probenmaterialien
This device is only suitable for use with grinding jars from Retsch GmbH with a
nominal volume of 12 ml - 500 ml.
They are available in the following materials:
•
Agate
•
Sintered corundum
•
Zirconium oxide
•
Stainless steel
•
Special steel
•
Tungsten carbide
5.13 Sample quantity
NOTICE
If the fill level in the grinding jar is too high or too low, this will impair the milling
result and may cause damage (increased abrasion) to the grinding set.
Ks
Q
Содержание PM400
