Retsch PM400 Скачать руководство пользователя страница 40

Страница: 40 / 60

Display and operation

Only scrolling downwards possible

6.2 Display unit

– operation of the device

This device offers a new, very convenient user inteface. All relevant data can be
entered and retrieved using a graphics display with one-button operation. The
menu is available in different languages.

6.2.1

Adjustment options using the display menu

The selection bar in the display should be operated as follows:

Rotating function I)

•

Rotate the operating button to get to the different menu items. The selected

menu items are marked by the dark selection bar. Areas that cannot be

changed are skipped.

Rotating function II)
•

Rotate the operating button to change numerical values and decisions in the

menu items.

Press I)

•

Press the operating button to open selected menu items.

Press II)

•

Press the operating button to confirm settings.

Press III)

•

Keeping the operating button pressed for longer takes you back to the basic

screen (Level 1).

6.2.2

Navigating between operating modes

•

Rotate the operating button in a clockwise direction until the dark line cursor
is in the navigation menu (

•

Press the operating button (

–

The icon for the scrolling direction (

) changes from

•

By pressing the operating button, navigate between manual operation,
Programs 01 to 10 and the basic settings operating modes.

•

Press the operating button (

) to activate the selected operating mode.

–

The icon for the scrolling direction (

) changes from

•

By rotating the operating button, switch to the sub-items of the selected
menu item.

6.3 Direct access to the language menu

If you have unintentionally set the wrong language, you can go straight to the
language menu by following the steps below.

Содержание PM400





























































Результаты поиска

Содержание PM400

Отзывы:

Похожие инструкции для PM400

Бренды по названию

Популярные бренды

Retsch PM400, Руководство пользователя

Результаты поиска

Содержание PM400

Отзывы:

Похожие инструкции для PM400

Бренды по названию

Популярные бренды