Retsch PM400, Руководство пользователя

Страница: 43 / 60

Display and operation
43
–
Automatic opening
–
Language
–
Brightness
–
Date
–
Time
–
Acoustic warning signal
–
Service
6.6 Manual operation
6.6.1 Grinding time
00:01:59 to 99:59:59 (hours : minutes : seconds)
The device is started with the preselected grinding time and at the last speed used.
Direction reversal with pause time has not been switched on
6.6.2 Speed
30 to 400 rpm
The device is started with the preselected grinding time and at the last speed used.
Direction reversal with pause time has not been switched on
6.6.3 Interval
00:00:01 to 99:59:59 (hours : minutes : seconds)
The interval time can be set here according to the grinding time. If no interval has
been set, no direction reversal can be set.
6.6.4 Direction reversal
On/off
The device is started with the preselected grinding time, speed and direction
reversal. The machine rotates in one direction for the set interval time, comes to a
halt and starts again immediately in the other direction without a pause time.
6.6.5 Pause time
00:00:01 to 99:59:59 (hours : minutes : seconds)
The pause time between intervals can be set here.
No pause time can be set if no interval has been set.
The device is started with the preselected grinding time, speed and direction
reversal. The machine rotates in one direction for the set interval time and comes
to a halt; once it has stopped at the set interval time, the previously set pause time
is displayed and counts down to 00:00:00.
The device starts again in the other direction when the pause time has expired.
6.6.6 Save parameters
The previously set parameters such as grinding time and speed can be saved in a
memory here.
•
Set the desired parameters.
•
By turning the control knob ( F ), switch to the Save parameters menu option.
•
Press the control knob ( F ).
–
The Save parameters menu opens and the dark cursor line is on Program.
•
Press the control knob ( F ) to select a program memory location.
•
By turning the control knob ( F ), switch to the desired memory location.
•
Press the control knob ( F ) to exit the memory location selection.
•
Select either