Preparing to Install Your Unit
Familiarize yourself with the Model One wiring harness (Note: There are
2 plug connectors: Plug "A" which contain power/ground connections & "B"
which contains the speaker leads)
PLEASE NOTE THAT THIS UNIT RE12V
TO BOTH THE RED & YELLOW WIRES,
OTHERWISE THE UNIT WILL NOT OPERATE.
CALL US OR EMAIL US IF YOU HAVE
QUESTIONS! ([email protected])
Installation Notes:
To prevent damage to the unit, do not connect the power connector
until you have completed the wiring process.
This is a 12 Volt negative-ground ONLY radio. If you have a positive-
ground, or a 6-volt system, you need to either convert to 12 volts or
purchase a separate inverter that would step up the voltage to 12 volts.
Please note that the inverter needs to be rated at 5 amps or higher
in order for the Apache to operate properly.
RF Remote
wire
10.
Car Radio
