Preparing to Install Your Unit (Continued)
NOTE: The following installation option is for advanced knowledgeable custom
installation specialists. The Retrosound Model One faceplate is removable
to allow for unique angled installations, canted angles, upside-down mounting
and other unique configurations limited only to your installation skills. Below
is a photo illustrating what the unit looks like with the control face removed,
connected by a ribbon cable from the body of the main unit to the radio’s control
face. (There is about 3” of cable length from the body to the radio control face).
After preparing for your installation and understanding your needs,
proceed to install the unit and connect the wiring, and make sure
you use the metal back strap to support the main body of the the unit from the
rear.
Apache Radio w/
advanced removable
faceplate for unique applications
Install metal backstrap behind
unit for rear support of the main body
3”
15.
