Preparing to Install Your Unit (Continued)
Prepare to set up your vehicle-specific kit
(Optional 67-72 GM Truck bezel shown as an installation example)
Once shafts are lined up to the shaft openings on the vehicle-specific
faceplate adapter, use a nut and washer to hold the faceplate in place on the
shafts so the Model One's face is flush with the opening of the faceplate (see
photos below).
NOTE: Modifying or cutting the radio’s brackets will not void your
warranty, this is what our radio is designed for.
Tighten shaft nuts and make sure that shaft depth works with
your dash configuration; the Retrosound Infinimount bracket shaft and bracket system
are extremely adjustable and care should be taken to ensure proper final fit
for the perfect installation.
Use supplied nuts & washers
to align bezel onto shaft.
Adjust nut height to allow bezel/faceplate
to be flush in your dash. Note, with this bezel, the area around the
radio face (chrome or black) mounts from behind your dash.
Vehicle-specific adapter & Model One
radio face should be flush for professional appearance
Please note that the rear knob
does not function,
only the front knobs of our
radio handle the menu
functions
12.
