Retrofire RF24BN Скачать руководство пользователя страница 1

Страница: 1 / 24

Model RF24BN/BP

Gravity Vent Fireplace Insert

Installation and Owner’s Manual

4001003-07

Patents Pending

Manufactured by

MILES INDUSTRIES LTD.

British Columbia, Canada

www.miles

replaces.com

WARNING: If the information in these
instructions is not followed exactly, a

or explosion may result causing property
damage, personal injury or loss of life.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light the appliance.
• Do not touch any electrical switch; do not

use any phone in your building.

• Immediately call your gas supplier from

a neighbor’s phone. Follow the gas
supplier’s instructions.

• If you cannot reach your gas supplier, call

the

re department.

This appliance is only for use with the type
of gas indicated on the rating plate. This
appliance is not convertible for use with
other gases, unless a certi

ed kit is used.

This appliance is a domestic room-heating
appliance. It must not be used for any
other purposes such as drying clothes,
etc.

This appliance is suitable for installation in
a bedroom or bed sitting room.

Do not store or use gasoline or other

ammable vapors and liquids in the

vicinity of this or any other appliance.

Installation and service must be performed
by a quali

ed installer, service agency or

the gas supplier.

This appliance may be installed in
an after-market permanently located,
manufactured (mobile) home where not
prohibited by local codes.

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

Massachusetts: The piping and

nal

gas connection must be performed by a
licensed plumber or gas

tter in the State

of Massachusetts.

Please read this manual BEFORE installing and operating this appliance.

Содержание RF24BN

























Результаты поиска

Содержание RF24BN

Отзывы:

Похожие инструкции для RF24BN

Бренды по названию

Популярные бренды

Retrofire RF24BN, Инструкция по установке и эксплуатации

Результаты поиска

Содержание RF24BN

Отзывы:

Похожие инструкции для RF24BN

Бренды по названию

Популярные бренды