Resson Technologies RD-11M, Руководство по эксплуатации

Страница: 76 / 94

- 72 -
MAX CUT
= 0.3mm
Z Axis increment per
step machining is fixed
Z STEP = 0.3 mm
step 5 : enter Z increment per step machining
RD-11M provides two options on the Z increment per step machining. Operator can make their selection on the
smooth R function.
Option 1 : Fixed Z step ( ) Z STEP
Under this option, the Z increment per step machining is fixed, since the ARC's curvature varies with
the Z position, the operator has to use their experience to select different Z STEP increment during
the ARC machining to get the optimal, fast machining
Option 2 : Maximum Cut ( ) MAX CUT
Under this option, RD-11M will calculate the best possible Z increment per step machining according to
the curvature of ARC, to make the interpolated point approximately equal to the MAX CUT entered.
RD-11M will calculate the best
Z step increment so that the
Max. distance between each
machining point approximately
the same.
All simplified R funtion to enter into ARC machining mode
machining parameters
have already entered
into RD-11M
enter Z step increment ( ) Z STEP
enter Maximum Cut ( ) MAX CUT
simulate Z axis move one step down
simulate Z axis move one step up
before the start of ARC machining, please ensure that the tool is positioned at the ARC starting point
and Z axis dial is set to zero ( 0.000 )
The two Axis does not have a Z Axis, RD-11M
so the uses the RD-11M
and to simulate the Z axis movement
R
esson
Technologies
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
Z STEP
0.300
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
Z STEP
0.000
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
MAX CUT
0.300
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
MAX CUT
0.000
ent
ent