Resson Technologies RD-11M, Руководство по эксплуатации

Страница: 28 / 94

- 24 -
- Line Angle ( LIN ANG )
- Line Distance ( LIN DIST )
- No.of Holes ( NO. HOLE )
Function : RD-11M provides LHOLE function for drilling a line of holes.
Simply enter the machining parameters below (following the step by step
guides that are displayed on the RD-11M's message screens), and the RD-11M will calculate
all the hole position co-ordinates and temporarily preset the hole
position coordinates to zero ( 0.000 ). The operator then moves the machine until
the display axes = 0.000, then the Line of Holes start-position is reached.
Angular direction :
Positive ( + ) - Clockwise
Negative ( - ) - Anti Clockwise
Y(+)
X(+)
After the above machining parameters are
entered into RD-11M, it presets all the
Line Hole positions to 0.000
Operator can press or to select
the Line Hole, and then move the machine
to display = 0.000, then the Line Hole position is reached
80.0
-30
Line Angle degree ( LIN ANG )................ - 30
( Anti-clockwise)
Line Distance ( LIN DIST )................ 80.00 mm
No. of Holes ( NO. HOLE ).............. 4
step 1 : The LHOLE function starts by using the current
tool position as the starting point, therefore,
locate the tool at the
LINE HOLE first
position
to enter the function LHOLE
locate the tool at the
Line Hole position first
to enter the
function LHOLE
enter the Line Angle ( ) LIN ANG
R
esson
Technologies
On Off
RD-11M
R
esson
Technologies
ent
R
I
O On Off
RD-11M
R
esson
Technologies
ent
R
I
O
0.000
LIN ANG