Resson Technologies RD-11M, Руководство по эксплуатации

Страница: 8 / 94

Purpose :
RD-11M provides the centre-find function by halving the current display coordinate, so that the
zero point of the work piece is located at the centre of the work piece.
To set the X Axis zero point at the centre of the work piece. Example :
Step 1 :
Locate the edge finder at one end of the work piece, then zero the X Axis.
Step 2 :
Locate the edge finder at the opposite
end of the work piece.
Step 3 :
Then half the display coordinate using centre-find function as per follows:
Now the X Axis zero point ( 0.000 ) is located at the X centre of the work piece.
- 4 -
R
esson
Technologies
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
78.480
50.110
28.865
ABS
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
0.000
50.110
28.865
ABS
On Off
RD-11M
R
esson
Technologies
ent
R
I
O On Off
RD-11M
R
esson
Technologies
ent
R
I
O
39.240
50.110
28.865
ABS
78.480
50.110
28.865
ABS
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
50.110
28.865
ABS
-34.560 0.000
50.110
28.865
ABS