Resson Technologies RD-11M, Руководство по эксплуатации

Страница: 63 / 94

- 59 -
Using two Flute ( ) SLOT DRILL
for plane XY R
function :
The R function of RD-11M has been designed to machine simple ARC,
We have discovered and concluded from our years of experience in DRO,
that in over 95% of cases, our customer only use the RD-11M to machine
extremely simple ARC. This is because they found that the parameters entry
of an R function was too complicated for them.
The new-design RD-11M provides a very easy-to-use R function to enable the
operator to machine simple R in a very short time.
In majority of cases, only eight types of ARC are used for machining. The RD-11M has
therefore incorporated those 8 type of R, and the operator must just select the type
of R they need to machine their part, and input the Radius, tool compensation and
increment per machining step. Then they can immediately begin ARC machining.
Using 4 Flute End Mill
to machine plane XZ/YZ R
2
8
4 3
6 7 5
1
Simplified R
8 R preset type
TYPE 1-8
2
8
4 3
6 7 5
1
Simplified R
8 R preset type
TYPE 1-8
2
8
4
3
6
7 5
1
Simplified R
8 R preset type
TYPE 1-8
Using Ball Nose slot drill
to machine plane XZ/YZ R
please notice that when using
flat end end mill to machine R,
as we are actually using the sharp
corner for cutting, therefore the
TOOL DIA must be set to 0.000
R
esson
Technologies