Respironics Trilogy 02, Техническая информация, Страница: 304 / 424

P
AGE
10-1
T
RILOGY
S
ERVICE
& T
ECHNICAL
I
NFORMATION
1002735, V
ER
. 05
C
HAPTER
10: T
RILOGY
T
ESTING
& C
ALIBRATION
10.0 C
HAPTER
O
VERVIEW
This chapter provides the necessary performance, service, and safety (optional) testing procedures. The
intervals for the specific tests are listed in the testing procedure sections below.
10.1 T
RILOGY
100 C
HECKOUT
P
ROCEDURE
This test procedure should be performed prior to connecting the device to a patient or in between patient
usage. Test both the active and passive circuits if you want to do a complete checkout on the device. The
tests should be performed as described in order to verify proper operation of the device.
10.1.1 T
OOLS
R
EQUIRED
•
Active Exhalation Porting Block with PAP (RI p/n 1054670)
•
Passive Exhalation Porting Block (RI p/n 1040372)
•
Active Exhalation Device with PAP (RI p/n 1053716)
•
Whisper Swivel II (RI p/n 332113)
•
Test Lung (RI p/n 1021671)
•
Small Flat Head Screwdriver
10.1.2 V
ISUAL
I
NSPECTION
1. Verify that the enclosure is not broken and that all applicable screws are in place.
2. Verify that the device handle, SD Card door, and Detachable Battery are secure and in good work-
ing order.
3. Verify that the rubber feet are on the bottom of the device.
10.1.3 I
NITIAL
S
ETUP
1. Connect the power cord to the device and then to an AC outlet.
2. Attach the test lung to the patient connection end of the desired circuit (Active PAP or Passive).
3. Access the Setup Screen. Reference the System Setup section for more information.
NOTE
The actual circuit configuration to be used on the patient should be used to perform the system checkout.
WARNING
If you notice any unexplained changes in the performance of the device, if it is making unusual sounds, if
the device or detachable battery are dropped, if water is spilled into the enclosure or if the enclosure is
cracked or broken, discontinue use and contact Respironics or an authorized service center for service.