background image

Directional Mix

The Directional Mix setting determines the degree of directionality 
in the output of the hearing instrument(s). Directional Mix applies 
omnidirectional processing below a crossover frequency and 
directional processing above that frequency. The default setting is 
prescribed depending on the hearing instrument model selected 
and the degree of low-frequency hearing loss. 

DFS Ultra

TM

 II

The “Mild” settings are most appropriate for speech and everyday 
inputs, “Moderate”, and “Strong” are good for feedback-critical 
situations like phone use. The “Music Mode” is designed for use in 
a “Music” program.

Auto DFS allows for a standard setting of DFS to be applied without 
calibration. If DFS has already been calibrated, the Auto DFS 
options (“On” and “Off”) are automatically grayed out.

Sound Shaper

TM 

Sound Shaper is ReSound’s proportional frequency compression 
system. Its default setting is “Off.” The recommended setting, 
based on the audiogram, is in bold typeface when the menu 
options are pulled down.

Low Frequency Boost

If fitting a UP receiver, low Frequency Boost can be applied for 
users desiring more gain from 250-1000 Hz. “Low”, “Medium” and 
“High” settings will be achieved unless the maximal gain has already 
been met at these frequencies. 

NoiseTracker

TM

 II

In NoiseTracker

TM

 II, the degree of noise reduction applied at any 

moment depends on the listening environment. Per environment 
noise reduction levels can be customized via Environmental 
Optimizer

TM

 II.

WindGuard

TM

WindGuard

TM

 uses signal processing to reduce wind noise, and is 

available in dual microphone devices.

Directional Mix option with temporary visualization 

of crossover frequency

1510_LN2_FittingGuide_MK604304_rB_8.5x11.indd   8

10/16/15   9:55 AM

Содержание AVENTA 3.9

















Отзывы: