Easy Smart GbE Switch
1.3 The Front Panel
The following figure shows the front panel of the switch.
LEDs Definition
This device provides extensive LEDs to show the activities on power, system and ports.
See the following description for your reference:
LED
Status
Operation
POWER
Steady Green
The switch is powered on.
Off
The switch is powered off.
LOOP
Steady Red
The switch is detected the network loopback.
Off
The Loop is not detected.
Link/ACT
Steady Green
Valid port connection;.
Blinking Green Valid port connection and there is data transmitting/receiving
Off
Port disconnected.
The Reset Button
Reset the switch to its factory default configuration via the RESET button. Press the RESET button
for more than two seconds to enable reset to default function. The switch automatically reboots and
reloads its factory configuration file. The RESET button is on the front panel of the switch.
1.4 The Rear Panel
The following figure shows the rear panel of the switch:
Power socket
The power socket located at the right side of the rear panel, is where you should connect the power
5
