Easy Smart GbE Switch
Port
Select the desired port for Storm Filter configuration. It is multi-optional,
you can select 8 ports at a time at most.
State
Select the state of setting
Disable:
Disable the storm filter function.
Enable
: Enable the storm filter function.
Rate
Select the bandwidth for receiving the specified packet on the port. The
packet traffic exceeding the bandwidth will be discarded. You can
choose the rate as below:
No Limit, 1M bps, 64M bps, 256M bps, 512M bps, 1G bps
Apply
Click
Apply
to make the settings take effect immediately.
Storm Filter Table
Storm Type
Displays the storm type of each port.
Port
Displays the port number of the switch.
Broadcast
Displays broadcast control states or rate for the port.
Multicast
Displays multicast control states or rate for the port.
Unknown Unicast
Displays unknown unicast control states or rate for the port.
Unknown
Multicast
Displays unknown multicast control states or rate for the port.
7.2 Loop Prevention
Click
Security
>
Loop Prevention
The switch can detect loops using loop detection packets. Supports Loop Prevention and Loop
Detection functions, The Loop detection will detect the cable loopback and provide the loop LED to
display. The Loop prevention will detect the cable loopback and block the corresponding port
automatically.
1. There are three modes for you to choose: Off, Loop Prevention, Loop Detection.
2. Select Loop Prevention from the drop-down box to enable the function and then click
Apply
.
3. Hold
“Ctrl”
and the left button of the mouse to select the ports you need, and then select
Enable
to enable the Loop Prevention for the selected port.
4. Click
Apply
, you can view a screen about Loop State of all ports as below.
39
