Easy Smart GbE Switch
Hold
“Ctrl”
and the left button of the mouse to select the port, and select the type, state and rate of
the selected port for bandwidth control, then click
Apply
.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Bandwidth Control Config
Port
Select the desired port for rate configuration. It is multi-optional, you can
choose eight ports at most at a time.
Type
Select
Ingress or Egress
from the drop-down box.
State
Enable or Disable
bandwidth control for the selected port.
Rate
Select the Rate for receiving packets or sending packets on the select
port. You can choose the rate as below:
No Limit(default), 1M bps, 64M bps, 256M bps, 512M bps, 1G bps
Apply
Click
Apply
to make the settings take effect immediately.
Bandwidth Control Table
Port
Displays the port number of the switch
Ingress Rate
Displays the ingress rate of all ports.
Egress Rate
Displays the egress rate of all ports.
Note:
1. When egress bandwidth control feature is enabled for one or more ports, you are suggested to
disable the flow control on each port to ensure the switch works normally.
37
