CyberBank G 3.5” SATA Giga LAN Disk Enclosure
5
Setting up your LAN Disk
Notice:
Electrostatic discharge may damage the electronic components of the LAN Disk. Be
sure your LAN Disk is properly grounded before you set up the LAN Disk. You may
touch the metal part of computer’s chassis or power supply unit to discharge any static
electricity that may have built up inside your body.
Handle a plastic bracket and do not touch any electronic components on the circuit
board.
To avoid damaging to your hard drive, please handle with care. Do not shake or drop
your hard drive in progress.
All electronic components have lifetime cycle, it may damage by a component
degeneration, electrostatic shock accident or personal carelessness. For the reason,
we strong recommend you that
always backup your important file for one or more
copy
to a CD-R, DVD-R or other storage media for prevent your precious data missing.
Installing a 3.5” hard drive to your LAN Disk
Follow the below steps to install a 3.5” hard drive to your LAN Disk.
1. Remove the two screws on the rear cover of the LAN Disk with a philips screwdriver and
remove the rear cover.