CyberBank G 3.5” SATA Giga LAN Disk Enclosure
１９
Mounting the NDAS device
1. Click the
NDAS Device Management
icon located on the system tray. Select the
Mount (Read-Only)
or
Mount (Read/Write)
option and click it. The system is mounting
immediately and the following message appears.
2. When the message disappears automatically, the mounting progress is finished.
Note:
There is an icon beside the NDAS device. Depending on the mounting mode, the
icon displays the different color. The following pop-up windows are in the
Read/Write mode and Read-Only mode. (More information about the NDAS device
status, please refer
The NDAS Device Management
on page
２１
).
(Read-Only mode) (Read/Write mode)
If you cannot see your NDAS device, please select
NDAS device > Refresh
Status
and check it again.
