3
Safety information
Danger to life! Danger of electric shock!
When taking a steam bath or showering, no electrical devices may be
operated in the steam bath cubicle or its proximity. Any contact between an
electrical device which is plugged in and steam or water can cause a fatal
electric shock. Before changing the illuminants, all phases of the steam bath‘s
power supply must be switched off!
Danger of scalding!
Hot steam is conveyed to the steam bath through the steam nozzle. There is
a risk of scalding if there is skin contact with the steam nozzle or steam in the
direct vicinity of the steam nozzle!
Children may not use the steam bath unsupervised.
Anybody with a healthy cardiovascular system can take a steam bath. Should
you be uncertain or if you have questions, please consult your doctor.
You should not use the steam bath after alcohol consumption or directly after
eating. This could burden the cardiovascular system.
You can only use the
repa
BAD DD 1000 ... liquid aromas. Other liquid aro-
mas may destroy the steam bath system.
The steam bath steam generator must be decalcified. The decalcifying cycle
can vary according to the respective existing water hardness.
Only use
repa
BAD decalcifying agents (art. no. EK 500).
If other agents are used, you run the risk of damaging the steam bath.
„Night design“ sensor illumination
All individual keys retain subdued lighting for some 60 minutes after the last
input. Power consumption for this is extremely low (LED technology).
Keylock
The keylock is activated when the display shows
----
irrespective of which key
is pressed. All functions are blocked.
The keylock can only be activated if all the functions are switched off.
In order to avoid accidental or unauthorised activation of steam bath functions
(for example by children), the keylock can be activated.
Switching the keylock on:
Press the
key until
----
is shown on the display
(the
key is illuminated).
