6
Switching the steam bath on and off
Press the
button briefly to switch the steam bath on.
When the steam bath is on, the
key is illuminated.
The current steam bath temperature is shown on the display and the steam ge-
nerator is heated. After a few minutes, steam flows into the steam bath cubicle.
If the
FlLL
, message appears on the display after switching on, there is too
little water in the steam generator. The steam generator fills automatically
with the correct water supply.
IF
FL..
, appears for the DE 510, DE 2000, DE 3000 and DE 4000 steam genera-
tors, the flushing function is active.
To switch it off, also press the
key briefly. The
key is no longer illuminated.
Displaying / setting the steam cubicle temperature
Displaying the steam cubicle temperature
(only for a steam bath which is swit-
ched on)
Press the
key once to show the steam bath temperature on the display. The
key is illuminated whilst the temperature is displayed.
Setting the steam cubicle target temperature
Press the
key longer (approx. 2 seconds) to switch over to temperature set-
ting mode. The key flashes.
The set target temperature is then shown on the display. The target temperature
can be set as desired using the
and
keys.
Pressing the
key again saves the changed target temperature or saves it
automatically after approx. 5 seconds.
The target temperature value remains saved until a new input is made.
Displaying / setting the timer runtime
Switching on the steam bath automatically starts the timer.
You can use the timer to end your steam bath automatically after a settable
time.
Display of the remaining timer running period
(only for a steam bath which is
switched on)
Press the
key briefly once to show the remaining timer running period on the
display. The key is illuminated whilst the timer running period is displayed.
