REF-176
9
Installation
Figure 4: Properly Seated Control Cable.
Figure 5: Removal of Control Cable.
•
Insert AC line voltage cable into AC input
(Figure 3:J) on the control box back panel. The
stabilized laser system is equipped with AC universal input. The control box will
automatically select for the appropriate operation at 115V or 230V.
•
Connect the control cable to the back of the control box (Figure 3:F) by aligning red dot on
cable connector to red marking on port control box receptacle (See Figure 5) and push to
insert; a mechanical click will indicate that it is properly seated.
Note: when removing
control cable make sure to pull the knurled portion backwards in order to release locking
mechanism and keep it pulled back while removing (See Figure 5). Damage can occur to
cable and/or control box if not removed properly
.
