REO 14309 Скачать руководство пользователя страница 12

REF-176 

 

      

                                            

                                                                                             12

 

 

 

Fuse Replacement. 

o

 

Fuses  are  located  in  the  AC  Input  housing.  Fuses  can  be  accessed  by  pushing  in 
release  mechanism  and  pulling  out  the  fuse  assembly  (Figure  7).  Fuses  can  be 
replaced with 1.25A/250V standard fuses. 
 

Figure 7: Fuse Replacement 

 

          

                                    

 

 
 
 
PRODUCT WARRANTY STATEMENT 

 

     Research Electro-Optics (REO) lasers and power supplies are warranted for twelve (12) months 
from the date of shipment.  Items will be free from defects in material and workmanship, and will 
conform  to  the  specifications  provided  on  the  REO  website  and  published  specification  sheets, 
under normal use and service when correctly installed and maintained.  REO will either repair or 

replace  (at  REO’s  sole  option)  any  defective  or  nonconforming  Product  or  part  thereof  which  is 
returned at Buyer’s expense to REO’

s facility, provided, that Buyer notifies REO in writing promptly 

after discovery of the defect or nonconformity and within the Warranty Period.   
     Repairs  made  or  Products  or  components  replaced  under  warranty  are  warranted  for  the 
remaining  unexpired  duration  of  the  original  Warranty  Period  for  such  Products  or  components.  

REO’s  standard  repair  charges  shall  be  applicable  forproducts  returned  for  repair  that  are  not 

covered under warranty. Out-of-warranty repairs are warranted for ninety (90) days from date of 
shipment of the repaired Product. 
 
     The  foregoing  warranty  does  not  apply  to  Products  or  components  thereof  which  are  (a) 
repaired, modified or altered by any party other than REO; (b) used in conjunction with equipment 
not provided or authorized by REO; (c) subjected to unusual physical, thermal, electrical or optical 
stress, improper installation, misuse, abuse, tampering, accident, contamination, or negligence in 
use, storage, transportation or handling; or (d) considered a consumable item or an item requiring 
repair or replacement due to normal wear and tear.  The foregoing warranty will also not apply if 

the “Warranty Void If Broken” seal located on any Product has been removed, broken or otherwise 

tampered with.  On-site warranty repair is not covered under the foregoing warranty.   
 

Содержание 14309















Отзывы: