Rentquip Patron GI-2000, Руководство по эксплуатации

Страница: 30 / 72

30
The engine should never run without the foam element;
excessive piston and cylinder wear may result.
7. Install the air filter case cover in its original position and tighten the
screw.
8. Install the cover and tighten the screws.
7.5 Muffler screen and spark arrester
WARNING
• The engine and muffler will be very hot after the engine has been run.
Avoid touching the engine and muffler while they are still hot with any
part of your body or clothing during inspection or repair.
1. Remove the screws (1), and then pull outward on the areas of the
cover (2) shown.
2. Loosen the bolt (3) and then remove the muffler cap (4), the muffler
screen (5) and spark arrester (6).
3. Clean the carbon deposits on the muffler screen and spark arrester
using a wire brush.
NOTICE
• When cleaning, use the wire brush
lightly to avoid damaging or scratching
of muffler screen and spark arrester.
4. Check the muffler screen and spark arrester. Replace them if
damaged.
5. Install the spark arrester.
maintenance