Renova isomatic, Руководство пользователя

Страница: 12 / 28

12
By default the system is not password protected. If the password feature is enabled, the operator needs to enter the
correct password to change the parameters.
Once the parameter programming mode has been entered, the display appears like the following picture:
The displayed parameter is selected by pressing the and keys. By pressing the OK key the cursor moves to the
value field. Each digit of the value field can be changed using the and keys and confirmed by the OK key. When
all digits have been changed (or confirmed), the OK key takes the cursor back to the parameter name field. To cancel
the changes press the Esc key.
To quit from parameter setup press Esc key.
list of parameters
GKP – Proportional gain
Usage: Proportional gain factor in automatic mode.
Description: This gain factor is used to calculate the proportional part of the correction needed to compensate
the measured error.
Range: 0 … 32767
Default: 100
GKD – Derivative gain
Usage: Derivative gain factor in automatic mode.
Description: This gain factor is used to calculate the derivative part of the correction needed to compensate
the measured error.
Range: 0 … 32767
Default: 0
GKI – Integrative gain
Usage: Integrative gain factor in automatic mode.
Description: This gain factor is used to calculate the integrative part of the correction needed to compensate
the measured error.
Range: 0 … 32767
Default: 0
GIL – Integrative limit
Usage: Maximum limit of the integrative part of the correction.