Renova isomatic, Руководство пользователя

Страница: 11 / 28

11
The difference between the measured value and the set point (desired value) determines the required correction
(required output). The correction value depends on the output value required:
Summary of the functions of the keys in Automatic mode:
Decrease the tension set point
Increase the tension set point
Esc
Return to menu page
OK + Esc
Alarm acknowledgement
parameter setup
The device parameters determine the system behaviour. They are numeric values used to program and configure the
ISOMATIC system. The parameters values should be checked for each specific application. It is advised to write down
the programmed parameter values after installing the system. Programming of these parameters requires a good
knowledge of the system functionality and of the meaning of every single parameter.
The parameters have default values but they can be changed by an enabled operator.