5 Maintenance
5-9
5.6 Changing oil filter
This section outlines the procedure for changing the oil filter.
An oil filter may only be changed when the unit is switched off
and fully depressurised and without power.
Step
Operation
1
Switch off the unit and take measures to prevent it
from being restarted. Allow the unit to cool to approx.
70°C and then remove the pressure as described in
Chapter 5.3.
2
Loosen the old oil filter with the hexagon screw and
remove it.
3
Place the new oil filter in the air end and tighten it.
4
Start the unit and check the oil filter for leaks.
5
Record the oil filter change on the maintenance
check sheet.
Comply with environmental guidelines
when disposing of used filter cartridges!
Content
Important note!
Changing the oil
filter
