31
Installing the limit switch actuation
1x actuation for limit switch
1x cylinder head screw M4x12
1x cylinder head screw M4x20
1x nut M4
Turn the cylinder head screw into the aluminium block and
counter it with the nut on the opposite side. The screw thread
must end with the nut.
Install the actuation of the limit switch as shown at the Y-plate.
The actuation must be aligned so that the screw head can ac-
tuate the limit switch at the undertable.
Install end actuation for the Z-axis
Hexagon threaded bolt M3
1x slotted screw M3x25
1x nut M3
Turn the hexagon thread bolt into the Y-plate from above as
shown.
Turn the slotted screw into the hexagon threaded bolt and
counter slightly with nut.
