Renishaw NCi-6, Руководство по установке

Страница: 24 / 32

3-6 NCi-6 non-contact tool setting interface: System installation
Connecting to the CNC
CNC
machine
control
Power
supply
0 Vdc
+ve
Machine
power
supply
NCi-6 connector CN2
1 M-code 3 (reverses switch SW2-4)
2 Not used (auxiliary 0 V)
3 Normally open
4 Common
5 Normally closed
6 Energise (11 Vdc to 30 Vdc)
7 SSR1 voltage-free
8 SSR1 voltage-free
9 SSR2 voltage-free
10 SSR2 voltage-free
11 M-code 1 (tool breakage)
12 M-code 2 (latch mode)
13 Screen
14 0 Vdc supply
15 11 Vdc to 30 Vdc supply
CAUTION:
If using SSR2 as an oscillating or pulsed output for a trigger signal to the control, the level
output SSR1 must be used to guarantee a reliable probe status check .
Auxiliary
relay
Activate
both for
Tool set
mode 2