Renishaw NCi-6, Руководство по установке

Страница: 13 / 32

2-5 www.renishaw.com/nci-6
Interface LEDs
Interface LED states
Seven LEDs are fitted on the front of the NCi-6 interface. These provide the operator with a visual
indication of the system’s status .
Status LED
The Status LED indicates the status of the NC system to the operator . The colours and associated states
are described in the tables on page 2-6 .
When the system is in set-up mode, the LED changes from red to amber to green as the beam voltage increases .
If the LED is green after exiting set-up mode, this indicates that set-up has been successful . If the LED is
not green, this indicates that set-up has not been successful and must be repeated .
Pulse width LED
Green:
20ms Not lit: 100ms
Auxiliary relay status LED
Green: Auxiliary relay energised Not lit: Auxiliary relay not energised
Mode LEDs: (Tool set 1, Tool break, Latch and Tool set 2)
Green:
Mode selected Not lit: Mode not selected
For more information see chapter 3, “System installation” .
NOTE: If no mode LEDs are lit, this indicates that the NCi-6 interface is in set-up mode .