8 Controls
Renfert
14 / 28
Easyclean MD
8
Controls
1
2
3
4
5
6
7
8
9
10
2
1
Cleaning duration display
value/unit/symbol
2
Current ultrasound mode display
name/bar segment
3
Start/stop
button
for ultrasonic cleaning (short press)/ultrasonic cleaning with auto-degas (long
press)
4
Temperature display
value/unit/symbol
5
Plus/minus buttons
for setting temperature/parameter values
(short press); quick cycle (long
press)
6
Heating button
on/off (short press)/temperature-controlled start (long press)
7
On/off button
for switching the unit on/off
8
Mode button
for setting ultrasound modes (short press)/switching modes (long press)
9
Plus/minus buttons
for setting cleaning duration/parameters
10
Display
showing all LED indicators for LED test LED test [
See also
2
8.1
Ultrasound mode display
The display shows the currently set ultrasound mode by displaying the mode name and a certain num-
ber of bar segments. You can choose from the following ultrasound modes:
degas
(0 segments)
auto-degas
(
degas
flashing)
Used to degas cleaning fluid and for specialist laboratory applica-
tions.
Used to degas the cleaning fluid before ultrasonic cleaning. The
set ultrasound mode starts automatically once degassing has
been completed (duration approx. 10 min.).
eco
(1 segment)
Used for gentle cleaning and quieter operation. The
sweep
ultra-
sound mode is a lower-intensity cycle.
