RZ/V2M Linux Package Start-Up Guide
R01US0527EJ0110 Rev.1.10
Page 16 of 39
Oct.8.2021
Figure 4-3. Writing process complete image
If the above message does not appear, this writing process has uncompleted. Check the error message in the
log file and take appropriate action according to the error message. Refer to Table 4-2 for the eMMC write
error and related operations.
After writing, run the following commands to set the u-boot environment variables to their default values.
=> env default -a
The following information describes each case of writing to the eMMC successfully or not.
This message will appear when the writing process
is completed.
