RZ/V2M Linux Package Start-Up Guide
R01US0527EJ0110 Rev.1.10
Page 24 of 39
Oct.8.2021
5.3
Shutdown the Board
To power down the system, follow the step below.
Step 1. Run shutdown command
Enter the command “rdk_shutdown” on the console.
root@rzv2m:~# rdk_shutdown
Note: Run this command during the power-off sequence on rootfs.
Step 2. Confirm the power-off
After executing rdk_shutdown, confirm LED2 (Base) and LED3 (Main) are turned off.
Step 3. Turn off the power switch on the board
After checking the LED2 (Base) and LED3 (Main), turn SW1(Base) off.
Note: Be sure to follow the steps correctly when shut down the system.
[1] run “rdk_shutdown”.
[2] Turn SW1(Base) off.
[3] Remove AC adapter from the outlet. *When finished using the system completely.
If the shutdown process does not follow the above steps, it may lead to destroying the device.
