RZ/V2M Linux Package Start-Up Guide
R01US0527EJ0110 Rev.1.10
Page 23 of 39
Oct.8.2021
5. Run-on the Board
This chapter explains how to set up the RZ/V2M Evaluation Kit and run the system.
5.1
Power on the board
Before connecting the AC adapter to an electrical outlet, make sure that the SW1 (Base) for the power
supply is turned off.
When the AC adapter is connected, the LED1 (Base) will light up. After turning on SW1 (Base), LED3 (Main)
and LED2 (Base) will light up, and RZ/V2M will start up.
5.2
Startup Linux
When you turn on the power switch, the U-Boot and Linux will startup. After booting, check the serial console
on Windows PC.
The root file system will be booted after the Linux kernel initializing. The red line in the following figure will
appear after the initialization of the root file system. Enter “root” on the login screen.
Figure 5-1. Root file system login screen
Linux root file system login screen
Login name: root
