RZ/V2M Linux Package Start-Up Guide
R01US0527EJ0110 Rev.1.10
Page 22 of 39
Oct.8.2021
Step 5. Shutdown
Enter the command “rdk_shutdown” on the console.
=> rdk_shutdown
Note: Run this command during the power-off sequence on U-Boot.
After executing rdk_shutdown, confirm LED2 (Base) and LED3 (Main) are turned off. Check the LED2 (Base)
and LED3 (Main) and turn off the power switch SW1(Base) on the RZ/V2M Evaluation Kit.
Note: Be sure to follow the steps correctly when shut down the system.
[1] run “rdk_shutdown”.
[2] Turn SW1(Base) off.
[3] Remove AC adapter from the outlet. *When finished using the system completely.
If the shutdown process does not follow the above steps, it may lead to destroying the device.
