Renesas RX130 Series Скачать руководство пользователя

Страница: 53 / 88

RX Family

ADC Module Using Firmware Integration Technology

R01AN1666EJ0220 Rev. 2.20

Page 53 of 74

Dec 01, 2016

3.2

R_ADC_Open()

This function applies power to the A/D peripheral, sets the operational mode, trigger sources, interrupt priority, and

configurations common to all channels and sensors. If interrupt priority is non-zero, the function takes a callback

function pointer for notifying the user at interrupt level whenever a scan has completed or comparator condition met.

The function initializes the S12AD FIT module. This function must be called before calling any other API functions.

Format

adc_err_t R_ADC_Open(uint8_t unit,

adc_mode_t const mode,

adc_cfg_t * const p_cfg,

void (* const p_callback)(void *p_args));

Parameters

unit

0 or 1. For MCUs with only one unit 0 should be passed (only the RX64M/RX71M/RX65x have 2 units).

mode

Operational mode. See type

adc_mode_t

in section 2.10 for the MCU being used.

The mode indicates the type of scan to be performed. For ADC_MODE_SS_MULTI_CH_

GROUPED_DBLTRIG_A, only one channel can be in Group A.

p_cfg

Pointer to configuration structure. See type

adc_cfg_t

in section 2.10 for the MCU being used.

The resolution field uses the

adc_res_t

enum. Lower resolution results in shorter conversion times (RX64M,

RX71M and RX65x).
The .alignment, .clearing, and .conversion fields use the

adc_align_t

adc_clear_t

, enums. If addition is

enabled, the .alignment field is ignored.
The .add_cnt field uses the

adc_add_t

enum. The number of samples added applies to all channels and sensors

(except for Temperature sensor on RX210). An individual channel may opt out of any addition using the Control()

function.
The .trigger and .trigger_groupb fields use the

adc_trig_t

enum for trigger sources.

The .priority and .groupb_priority fields use interrupt priority levels ranging from 1 (lowest) to 15 (highest). If the

priority is set to 0, the corresponding interrupt is disabled and the application must poll for the scan to complete

(use Control() function).

p_callback

Optional pointer to function called from interrupt when a scan completes

Return Values

ADC_SUCCESS:

Successful

ADC_ERR_AD_LOCKED:

Open() call is in progress elsewhere

ADC_ERR_AD_NOT_CLOSED: Peripheral is still running in another mode; Perform R_ADC_Close() first

ADC_ERR

INVALID_ARG:

mode or element of p_cfg structure has invalid value

ADC_ERR

ILLEGAL_ARG: an argument is illegal based upon mode

ADC_ERR_MISSING_PTR:

p_cfg pointer is FIT_NO_PTR/NULL

Properties

Prototyped in file “r_s12ad_rx_if.h”

Description

Applies power to the A/D peripheral, sets the operational mode, trigger sources, interrupt priority, and

configurations common to all channels and sensors. Setting the interrupt priority to 0 indicates that the

application will poll until scanning completes (see Control()). With a non-zero interrupt priority (interrupt

Содержание RX130 Series

























































































Результаты поиска

Содержание RX130 Series

Отзывы:

Похожие инструкции для RX130 Series

Бренды по названию

Популярные бренды

Renesas RX130 Series, Примечание к применению

Результаты поиска

Содержание RX130 Series

Отзывы:

Похожие инструкции для RX130 Series

Бренды по названию

Популярные бренды