R0E521000CPE00 User’s Manual
3. Usage (How to Use the Emulator Debugger)
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 66 of 92
3) Setting trace write conditions
Setting trace write conditions
You can specify a condition for the cycles to be written into the
trace memory.
- Total
All cycles are written into memory.
- Pick
up
Only the cycles in which the specified condition was met are
written into memory.
- Exclude
Only the cycles in which the specified condition was not met are
written into memory.
When you have selected “Pick up” or “Exclude” for the trace write
condition, click this button. The Realtime-trace Write Condition
dialog box shown below will appear.
4) Realtime-trace Write Condition dialog box
Write mode
Only the cycle in which the specified Start event occurred
A range of cycles from when the specified Start event occurred to
when the specified Start event became nonexistent
A range of cycles from when the specified Start event occurred to
when the specified End event occurred
OR
Pick up
